See it working
真实产线实拍
Real production footage from the HSI fast-charging test platform — validated on real production lines, no renders, no simulations. / 真实产线实拍，非渲染、非模拟。
The base flagship of the series: 60V/10A/240W range, full PD3.2 protocol coverage, 7-inch color screen, CC/D± auto-detection, plug-and-test, external trigger and ripple test — everything a serious line needs.
Real production footage from the HSI fast-charging test platform — validated on real production lines, no renders, no simulations. / 真实产线实拍，非渲染、非模拟。
Phone chargers, car chargers, multi-port chargers, power adapters
Buy only what your line actually needs.
Setup, training and after-sales in English and Chinese.
Type-C cable front and back testing runs in the sequence — no manual flip step, no dedicated test lead per station.
Test the latest USB PD3.2 chargers out of the box.
Full load and protocol validation for high-wattage chargers.
Tests car chargers alongside phone and multi-port chargers in one bench.
PD3.2 plus full Huawei / Samsung / OPPO / VIVO coverage on a 7-inch screen.
for a benchtop unit with on-screen readout and 240W power.
when you must test multiple products in parallel on the line.
when 150W is enough and budget is the priority.
20+ fast-charge protocols — QC2.0/3.0, PD3.0/3.1, PPS, PE, and full Huawei / Samsung / OPPO / VIVO coverage, all verified on real production lines.
60V / 10A / 240W full range — covers phone, car, multi-port chargers and power adapters, including 240W GaN chargers.
Voltage accuracy ±0.1% (typical) and current accuracy ±0.1% (typical), measured across the 60V / 10A full range on a calibrated bench.
Yes — a built-in E-Marker module tests Type-C cables front and back inside the sequence, with no manual flip and no dedicated test lead.
Yes — an external-trigger port starts/stops from your fixture or PLC, and results are logged for MES upload. Exact interface confirmed per model.
Single-unit MOQ — buy only what your line needs, no bulk commitment.
Yes — a factory calibration report is available on request for every unit shipped.
We are HSI’s authorized overseas distributor for fast-charge test equipment. Your quote and after-sales are handled personally by Xie Yang (谢杨) — one accountable partner, direct pricing, bilingual support.
1-year warranty — every unit covered for 12 months from shipment, with remote setup guidance and after-sales support.
Normally in stock and shipped within a few working days; special configurations quoted case by case.
Certifications are done per model only when the application requires it; calibration report and full details on request — see datasheet. / 认证按机型需求办理，校准报告与完整资料请索取数据表。
Single-unit MOQ · bilingual support · remote setup guidance. Tell us your line scenario and we help you pick the configuration — usually within 24 hours.
